Crossref Cited-by Linking logo

Collect. Czech. Chem. Commun. 1979, 44, 3077-3089
https://doi.org/10.1135/cccc19793077

Pumping effect of impellers with flat inclined blades

Jaroslav Medeka and Ivan Fořtb

a Department of Chemical Engineering, Technical University, 602 00 Brno
b Department of Chemical Engineering, Prague Institute of Chemical Technology, 166 28 Prague 6

Crossref Cited-by Linking

  • Krupica Adam, Jirout Tomáš: Blending in a spherical tank. Chemical Engineering Research and Design 2023, 190, 489. <https://doi.org/10.1016/j.cherd.2023.01.008>
  • Stelmach Jacek, Musoski Radosław, Kuncewicz Czesław, Jirout Tomas, Rieger Frantisek: Efficiency of PBT Impellers with Different Blade Cross-Sections. Energies 2022, 15, 585. <https://doi.org/10.3390/en15020585>
  • Bois Rémy, Adriao Océane, Delaplace Guillaume, Pezron Isabelle, Nesterenko Alla, van-Hecke Elisabeth: Influence of process variables on foaming ability of surfactants: experimental study and dimensional analysis. Chemical Engineering Research and Design 2020. <https://doi.org/10.1016/j.cherd.2020.10.021>
  • Jirout Tomáš, Jiroutová Dita: Application of Theoretical and Experimental Findings for Optimization of Mixing Processes and Equipment. Processes 2020, 8, 955. <https://doi.org/10.3390/pr8080955>
  • Vlček Petr, Kysela Bohuš, Jirout Tomáš, Fořt Ivan: Large eddy simulation of a pitched blade impeller mixed vessel – Comparison with LDA measurements. Chemical Engineering Research and Design 2016, 108, 42. <https://doi.org/10.1016/j.cherd.2016.02.020>
  • Ćosić Marija, Kaćunić Antonija, Kuzmanić Nenad: The Investigation of the Influence of Impeller Blade Inclination on Borax Nucleation and Crystal Growth Kinetics. Chemical Engineering Communications 2016, 203, 1497. <https://doi.org/10.1080/00986445.2016.1212023>
  • Petera Karel, Dostál Martin, Jirout Tomáš, Fořt Ivan: Heat transfer similarities between impinging jets and axial-flow impellers. Theor Found Chem Eng 2016, 50, 937. <https://doi.org/10.1134/S0040579516060130>
  • Dostál Martin, Věříšová Marcela, Petera Karel, Jirout Tomáš, Fořt Ivan: Analysis of heat transfer in a vessel with helical pipe coil and multistage impeller. Can J Chem Eng 2014, 92, 2115. <https://doi.org/10.1002/cjce.22033>
  • Fořt Ivan: Comments on “CFD simulation and PIV measurement of the flow field generated by modified pitched blade turbine impellers” by Ge et al. [Chem. Eng. Res. Des. (2013), http://dx.doi.org/10.1016/j.cherd.2013.08.024]. Chemical Engineering Research and Design 2014. <https://doi.org/10.1016/j.cherd.2014.03.002>
  • Alic Fikret: Thermal-hydraulic irreversibility of electrically heated impeller blades. Chemical Engineering Science 2013, 104, 549. <https://doi.org/10.1016/j.ces.2013.09.040>
  • Kaćunić Antonija, Akrap Marija, Kuzmanić Nenad: Effect of impeller type and position in a batch cooling crystallizer on the growth of borax decahydrate crystals. Chemical Engineering Research and Design 2013, 91, 274. <https://doi.org/10.1016/j.cherd.2012.07.010>
  • Fořt Ivan, Seichter Pavel, Pešl Luboš: Axial thrust of axial flow impellers. Chemical Engineering Research and Design 2013, 91, 789. <https://doi.org/10.1016/j.cherd.2012.10.001>
  • Fořt Ivan: On hydraulic efficiency of pitched blade impellers. Chemical Engineering Research and Design 2011, 89, 611. <https://doi.org/10.1016/j.cherd.2010.10.005>
  • Fořt Ivan, Jirout Tomáš: The relation between the rate of erosion wear of a pitched blade impeller and its process characteristics. Chemical Engineering Research and Design 2011, 89, 1929. <https://doi.org/10.1016/j.cherd.2011.01.024>
  • Musil L., Vlk J., Jiroudková H.: Suspending solid particles in an agitated tank with axial-type impellers. Chemical Engineering Science 1984, 39, 621. <https://doi.org/10.1016/0009-2509(84)80168-2>